► Features

To operate reservoirs with high flow rates and low head, the optimal choice is the MXT mixed level gate. This equipment exerts precise control over the bypass level, while accumulating the incoming flow upstream until the gate limit is reached. In critical situations, the gate can be provided with an emergency opening to prevent possible overflows upstream. By having a downstream control section that allows a known flow curve, specific flows can be constantly bypassed, as long as the reservoir level allows it.

These solutions consider small or medium-sized civil works, including one or more gates controlled by floats and ballast weights. The absence of motors and sensors contributes to the robustness and reliability of this equipment.

The gates allow set point changes on the regulated levels in case the customer requires it, manually or with the automation of small devices inside the gate. This automation is focused on the management of the set point change, not on the adjustment operations of the gate itself in case of fluctuations in the water source, a situation that will always continue autonomously by the floats of the gate, which guarantees an efficient, smooth and reliable operation under the most severe weather conditions.

► Tips about use

This solution includes equipment inspired by a simple hydraulic design, totally autonomous, robust and free of any mechanical complication, allowing it to adapt to the most severe working conditions.

► Engineering and Selection

For dimensioning and selection of the appropriate model to include in the solution, as well as for installation instructions and other technical information, we invite you to see our technical brochure and t ponerse en contact our specialist.

► Features

This equipment is highly adaptable to most projects that raise the water level to control bypass. With an extremely simple design, they consist of a trapezoidal sector gate linked to a system of float and ballast weights, which opens or closes according to the upstream head and the demanded water requirement.

This system operates completely autonomously. The regulation of the flow to be bypassed can be performed by a slide gate, a weir (for fixed flow rates) or by (TEMEC's Modulo de Orificio) with a limited variation range for specific flow rates. The absence of motors and sensors contributes to the robustness and reliability of this equipment.

► Tips about use

This solution includes equipment inspired by a simple hydraulic design, totally autonomous, robust and free of any mechanical complication, allowing it to adapt to the most severe working conditions.

► Engineering and Selection

For dimensioning and selection of the appropriate model to include in the solution, as well as for installation instructions and other technical information, we invite you to see our technical brochure and t ponerse en contact our specialist.

► Features

These solutions consider the use of AB3 equipment in cases where AB1 gates reach their design maximum capacity. While performing the same function but with an extended operating range, these gates are ideal for relatively low flow rates. They are controlled in a similar way to AB1 gates.

This system operates completely autonomously. The regulation of the flow to be bypassed can be performed by a slide gate, a weir (for fixed flow rates) or by (TEMEC's Modulo de Orificio) with a limited variation range for specific flow rates. The absence of motors and sensors contributes to the robustness and reliability of this equipment.

► Tips about use

This solution includes equipment inspired by a simple hydraulic design, totally autonomous, robust and free of any mechanical complication, allowing it to adapt to the most severe working conditions.

► Engineering and Selection

For dimensioning and selection of the appropriate model to include in the solution, as well as for installation instructions and other technical information, we invite you to see our technical brochure and t ponerse en contact our specialist.

► Features

These solutions propose medium-sized civil works with a stilling pool to break the charge and deliver the ecological flow by gravity. Ideal for large flows with high hydraulic charges.

As for AB1, AB3, this equipment operates completely autonomously. The regulation of the flow rate to be bypassed can be performed by a slide gate, a weir (for constant flow rates) or by an Distributor (TEMEC's Modulo de Orificio) with a limited range of variation for specific flow rates. The absence of motors and sensors contributes to the robustness and reliability of this equipment.

► Tips about use

This solution includes equipment inspired by a simple hydraulic design, totally autonomous, robust and free of any mechanical complication, allowing it to adapt to the most severe working conditions.

► Engineering and Selection

For dimensioning and selection of the appropriate model to include in the solution, as well as for installation instructions and other technical information, we invite you to see our technical brochure and t ponerse en contact our specialist.

► Features

These solutions propose the use of modular measurement equipment to control deliveries at the outlets for ecological flow. They are mounted on the crest of the headworks itself, always assuming that the level variations are compatible with the operating ranges.

For limited level variations, in the range of approximately 70 cm or less, the implementation of Distributor (TEMEC's Modulo de Orificio) is recommended. These consist of calibrated orifices for different predefined flow rates. In this way, within their operating range, these devices will provide a specific flow rate according to the user's preferences.

The absence of any complex mechanisms or lifting system contributes to the robustness and reliability of this equipment.

► Tips about use

This solution includes equipment inspired by a simple hydraulic design, totally autonomous, robust and free of any mechanical complication, allowing it to adapt to the most severe working conditions.

► Engineering and Selection

For dimensioning and selection of the appropriate model to include in the solution, as well as for installation instructions and other technical information, we invite you to see our technical brochure and t ponerse en contact our specialist.

► Features

These solutions are small or medium-sized civil works for ecological flow outlets, which include one or more slide gates controlled by electric motors managed by a system of sensors upstream and downstream of the equipment, in order to avoid manual operation.

For reservoir outlet works, we manufacture on request devices that perfectly adapt to the shape of the civil works and generally with a seal on 4 sides. These devices open or close in an automated way according to instructions that have been loaded in the remote control system. They also allow local manual operation.

► Tips about use

This solution includes equipment inspired by a simple hydraulic design, totally autonomous, robust and free of any mechanical complication, allowing it to adapt to the most severe working conditions.

► Engineering and Selection

For dimensioning and selection of the appropriate model to include in the solution, as well as for installation instructions and other technical information, we invite you to see our technical brochure and t ponerse en contact our specialist.